Mitsubishi SUV Eclipse Cross CVT shuddering, surging and rpm flare
What this problem usually means
The Eclipse Cross's Jatco CVT8 (JF016E) can shudder or judder from a stop, surge with rpm flare, feel powerless as if slipping, and whine - symptoms Go-Parts' transmission guide attributes to the steel push belt and hydraulic control system, including valve body problems. Dark fluid with metal flakes indicates internal belt slippage and serious failure.
Likely causes
- Slipping CVT push belt
- Valve body/hydraulic pressure faults
- Degraded CVT fluid
How to fix it — step by step
- Note judder from a stop, flare without acceleration, or whining that follows engine speed
- Have CVT fluid inspected - dark fluid with metal flakes is a bad sign
- Confirm the CVT-ECU software recall (22V-563) has been done
- Internal belt/valve body failure means specialist repair or CVT replacement → Shop the cvt valve body at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the cvt transmission.
Shop the cvt transmission at Amazon
Also tied to this fault: cvt valve body - Shop at Amazon
Parts that commonly fix it
- cvt transmission - Shop at Amazon
- cvt valve body - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.