Mitsubishi SUV Eclipse Cross Forward collision system brakes for no reason

What this problem usually means

2018 Eclipse Cross models were recalled for two software faults: the Forward Collision Mitigation system could brake when it was not needed, and a stability control software fault could temporarily disable adaptive cruise, collision mitigation, brake auto hold, hill start assist and AWD control. Carify's Eclipse Cross guide summarizes both campaigns and notes some owners still report false collision warnings.

Likely causes

  1. FCM software misreading situations
  2. Active Stability Control software fault

How to fix it — step by step

  1. Check whether both 2018 software recalls have been applied to your VIN
  2. Note false warnings/braking events with date and conditions
  3. Have the dealer apply any outstanding software updates
  4. If false braking continues after updates, have the camera/radar alignment and sensors checked

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mitsubishi SUV Eclipse Cross problems

See all Mitsubishi Eclipse Cross codes & guides →