Mercedes-Benz Sedan A-Class Timing chain rattle on cold start

What this problem usually means

The M270 1.6 and 2.0-litre turbo petrol engines (A180, A200, A250, W176) can develop a rattly cold start as the timing chain stretches and the plastic guides wear, usually from around 50,000 to 80,000 miles and worse on cars used mainly for short urban runs; leaking hydraulic tensioners let the chain rattle for several seconds on a cold start. Left alone, the chain can skip a tooth, bringing an engine warning light, rough running or a misfire. Because the engine sits transversely, a full chain, guide and tensioner kit is a labour-heavy job. No confirmed manufacturer recall covers this wear pattern on the A-Class.

Likely causes

  1. Timing chain stretch on the M270 turbo petrol → Shop the timing chain at Amazon
  2. Worn plastic chain guides
  3. Leaking hydraulic tensioner losing pressure when parked

How to fix it — step by step

  1. Start the car stone cold and listen for a metallic rattle lasting several seconds from the front of the engine
  2. Scan for timing/camshaft codes and note any rough running or misfire
  3. Do not keep driving on a persistent rattle; a skipped tooth can seriously damage the engine
  4. Have the chain, guides and tensioner replaced as a kit by a Mercedes specialist - internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz Sedan A-Class problems

See all Mercedes-Benz A-Class codes & guides →