Mercedes-Benz Sedan A-Class Instrument cluster goes black

What this problem usually means

On W177 A-Class cars (2018 on), the digital driver display behind the wheel can go completely black, leaving no speed, fuel or gear readout - sometimes clearing itself after a software update, sometimes needing the LVDS cable or connector behind the dash replaced. It has turned up on cars only a few thousand miles old and can come back; 2019 and 2020 cars are the documented concern, so the display should be checked on every start. Mercedes has issued a formal recall for the same kind of MBUX display fault on later C-Class, E-Class and GLC models, but nothing confirmed for the A-Class itself.

Likely causes

  1. MBUX/driver display software fault blanking the cluster
  2. LVDS cable or connector fault behind the dash

How to fix it — step by step

  1. Restart the car several times and confirm the display comes on every time
  2. Check whether a software update is available and whether it clears the fault
  3. If blackouts persist, have the LVDS cable and connector behind the dash inspected and replaced as needed → Shop the lvds cable at Amazon
  4. Keep records of repeat failures; the fault is documented even where a dealer reports no known issue

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz Sedan A-Class problems

See all Mercedes-Benz A-Class codes & guides →