Mercedes-Benz Sedan A-Class Engine misfires - cylinder head wear

What this problem usually means

The W177 A-Class shares the M260 2.0-litre turbo engine fault documented across the MFA2 platform: M260 engines produced approximately 2019-2022 can suffer premature wear of the exhaust valve seat rings and valve guides. As the seats wear, the combustion chamber loses its seal, causing rough running, misfires (codes P0300/P0302 or similar) and reduced power, typically between 30,000 and 80,000 km. The valve seats cannot be reworked - the entire cylinder head must be replaced. Mercedes extended the cylinder-head warranty on affected M260 engines to 15 years or 241,000 km for 2019-2022 GLA, A-Class, CLA and GLB models.

Likely causes

  1. Exhaust valve seat ring wear (M260, approx. 2019-2022 production)
  2. Exhaust valve guide wear causing compression leakage

How to fix it — step by step

  1. Have the misfiring cylinders identified and a compression or leak-down test done to separate head wear from plugs and coils → Shop the cylinder head at Amazon
  2. Rule out spark plugs, coils and injectors first
  3. Ask a Mercedes dealer to confirm the 15-year/241,000 km M260 cylinder-head warranty extension against your VIN before authorising work
  4. If the head is condemned, replacement is internal engine work for a dealer or specialist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz Sedan A-Class problems

See all Mercedes-Benz A-Class codes & guides →