Mazda SUV CX-90 Sticky steering and loss of assist feel
What this problem usually means
Several CX-90 owners report sticky steering, where the wheel develops a resistant feel during turns. The wheel can fail to return to centre automatically and may need excessive corrective force, pointing to binding in the steering gear assembly or steering rack.
Likely causes
- binding steering gear assembly
- binding steering rack
How to fix it — step by step
- Do not keep driving if the wheel suddenly becomes very heavy or will not return to centre - pull over safely
- Check by VIN whether the CX-90 steering recall applies to the vehicle
- Note whether the stickiness happens at low speed, highway speed, or both
- Have a dealer inspect the steering gear assembly and steering rack for binding and carry out the authorized repair or software calibration → Shop the steering gear at Amazon → Shop the steering rack at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the steering gear.
Shop the steering gear at Amazon
Also tied to this fault: steering rack - Shop at Amazon
Parts that commonly fix it
- steering gear - Shop at Amazon
- steering rack - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.