Mazda SUV CX-90 Front suspension clunking noise
What this problem usually means
Some CX-90s make clunking or knocking noises from the front lower control arm area over bumps. The noises point to suspension bushings, ball joints or control arms that may be wearing prematurely or coming loose.
Likely causes
- worn suspension bushings
- loose or worn ball joints → Shop the ball joint at Amazon
- worn front lower control arms
How to fix it — step by step
- Note whether the clunk happens over bumps, when turning, or both
- Check for uneven front tire wear, which can accompany loose suspension parts
- Avoid lifting the vehicle and pulling on suspension parts yourself
- Have a shop inspect the suspension bushings, ball joints and control arms for premature wear or looseness → Shop the suspension bushing at Amazon → Shop the control arm at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control arm.
Shop the control arm at Amazon
Also tied to this fault: ball joint - Shop at Amazon; suspension bushing - Shop at Amazon
Parts that commonly fix it
- control arm - Shop at Amazon
- ball joint - Shop at Amazon
- suspension bushing - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.