Maytag Washer Top-Load HE lid Error Code
What the lid code means
The washer lid was left open. If it stays open for more than 10 minutes, the cycle resets and the water in the washer drains out.
Likely causes
- Lid left open at the start of the cycle
- Lid opened and not closed during the cycle
How to fix it — step by step
- Close the lid to clear the display
- If the washer has drained, start the cycle over
- Do not add more detergent if restarting, as the clothes are already wet with detergent
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the lid code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Maytag manual is on Maytag's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.