Maytag Washer Top-Load HE drn Error Code
What the drn code means
The washer is not draining properly. Maytag notes this can sometimes be an installation problem with the drain hose.
Likely causes
- Drain hose kinked, clogged or installed incorrectly
- Standpipe too high, too low or hose pushed too far in
- Blocked drain pump → Shop the drain pump at RepairClinic
How to fix it — step by step
- Check the drain hose for kinks and clogs
- Check the hose is not pushed too far into the standpipe and the height is correct
- Remove and rinse out any blockage you can reach
- Restart the cycle and watch a full drain
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drain pump.
Parts that commonly fix the drn code
- drain pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Maytag manual is on Maytag's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.