LG Robot vacuum HOM-BOT Square Unable to initiate smart diagnosis due to a low battery.
What this problem usually means
Smart Diagnosis result: the battery is too low to start diagnosis.
Likely causes
- Battery charge too low
How to fix it — step by step
- Recharge the battery (dock the HOM-BOT on the home station)
- Try Smart Diagnosis again after recharging
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related LG Robot vacuum HOM-BOT Square problems
- A problem has been found in the acceleration sensor.
- A problem has been found in the suction motor.
- A problem has been found on the Gyro Sensor.
- A problem has been found on the left wheel sensor.
- A problem has been found on the right wheel sensor.
- A problem has been found with the brush. Please check for any foreign material.
- Battery is low. Please move HOM-BOT onto the home station to charge.
- HOM-BOT cannot continue cleaning. Please check the area around it.
- HOM-BOT will not charge due to a problem with the cliff sensors.
- HOM-BOT will not charge due to infrared sensor error.
- HOM-BOT will not charge due to ultrasonic sensor error.
- Please check for foreign material on the left wheel.