Jeep Truck Gladiator Rear driveshaft assembled without grease
What this problem usually means
Recall 19V-636 covered 2020 Gladiators built between December 15, 2018 and June 25, 2019 whose rear driveshaft monoblock joint may have been assembled without grease, about 3,427 trucks. The dry joint can wear and the driveshaft could fracture and cut drive power, and affected trucks get a new driveshaft under the recall.
Likely causes
- rear driveshaft monoblock joint assembled without grease at the factory
- dry joint wearing until the driveshaft can fracture
How to fix it — step by step
- Stop driving if you feel strong vibration under acceleration or hear clunking or squeaking from the driveshaft
- Check by VIN whether the recall applies, specifically recall 19V-636 and the December 2018 to June 2019 build window
- Inspect the driveshaft joints for play, dryness or damage on a lift
- Have the dealer replace the rear driveshaft under the recall where it applies → Shop the rear driveshaft at Amazon
- Replace worn U-joints if the truck is not covered, then road-test for vibration or clunks → Shop the u-joints at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the rear driveshaft.
Shop the rear driveshaft at Amazon
Also tied to this fault: u-joints - Shop at Amazon
Parts that commonly fix it
- rear driveshaft - Shop at Amazon
- u-joints - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.