Jeep Truck Gladiator Diesel fuel pump failure

What this problem usually means

The 3.0L EcoDiesel Gladiator uses a Bosch CP4.2 high-pressure fuel pump that may fail and stall the engine, increasing crash risk. Two recalls cover it: 22V767 for 2021-2022 Gladiators and 23V263 for 2021-2023 Gladiators, under which dealers replace the high-pressure fuel pump and inspect and replace other fuel system components as necessary, free of charge.

Likely causes

  1. failing bosch cp4.2 high-pressure fuel pump
  2. pump failure stalling the engine or causing loss of power, rough running or a no-start

How to fix it — step by step

  1. Stop driving and have the truck towed if the diesel stalls, loses power or will not restart
  2. Check by VIN whether the recall applies, and check both 22V767 and 23V263 since a 2023 truck falls only under the later one
  3. Have the fuel sampled and inspected for metallic debris from a failing pump
  4. Have the dealer replace the high-pressure fuel pump and any other fuel system components the recall procedure requires → Shop the high-pressure fuel pump at Amazon
  5. Confirm the truck starts, idles and pulls cleanly with no stall after the repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep Truck Gladiator problems

See all Jeep Gladiator codes & guides →