iRobot Roomba 600 Series Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 16 problems covered.
Shop iRobot Roomba 600 Series parts at Amazon
Not sure of the code? Tap along with it
If your iRobot Robot vacuum blinks or beeps a pattern instead of showing a code, tap the button in time with each blink or beep. A pause longer than a second and a half starts a new group - we will match the rhythm to a code.
Your rhythm: -
- Charging Error 1 — Charging error shown by 1 blink while charging: Roomba's battery is not connected.
- Charging Error 2 — Charging error shown by 2 blinks (display Err2) while charging: Roomba has a charging error. The 600 Series manual gives no more specific…
- Charging Error 3 — Charging error shown by 3 blinks (display Err3) while charging: Roomba has a charging error. The 600 Series manual gives no more specific…
- Charging Error 5 — Charging error shown by 5 blinks (display Err5) while charging: Roomba has a charging error. The 600 Series manual gives no more specific…
- Charging Error 6 — Charging error shown by 6 blinks (display Err6) while charging: Roomba's battery is too warm.
- Charging Error 7 — Charging error shown by 7 blinks (display Err7) while charging: Roomba's battery is not cooling.
- Clunking sound while cleaning — A repeated clunking or clacking noise from the brush deck while cleaning. The 600 series uses the same Cleaning Head Module (CHM) design as…
- Error 1 — Roomba is stuck with a side wheel hanging down: “Error one (1). Move Roomba to a new location, then press CLEAN to restart.” One of the…
- Error 10 — A side wheel is stuck or its bumper is not registering obstacles: "Error ten (10). Spin Roomba's side wheels to clean."
- Error 14 — Roomba is not detecting an installed bin, spoken digit-by-digit as "Error one four (1-4). Re-install Roomba's bin, then press CLEAN to…
- Error 18 — Roomba cannot return to the Home Base or starting position, spoken digit-by-digit as "Error one eight (1-8)."
- Error 2 — The main brushes cannot turn: "Error two (2). Open Roomba's brush cage and clean brushes."
- Error 5 — A side wheel is stuck: "Error five (5). Spin Roomba's side wheels to clean."
- Error 6 — The cliff sensors are dirty, Roomba is stuck, hanging over a cliff, or is on a dark surface: "Error six (6). Move Roomba to a new location…
- Error 7 — A side wheel is stuck: "Error seven (7). Spin Roomba's side wheels to clean."
- Error 9 — The bumper is compressed or the bumper sensor is dirty: "Error nine (9). Tap Roomba's bumper to clean."