iRobot Roomba 500 Series Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 15 problems covered.
Shop iRobot Roomba 500 Series parts at Amazon
Not sure of the code? Tap along with it
If your iRobot Robot vacuum blinks or beeps a pattern instead of showing a code, tap the button in time with each blink or beep. A pause longer than a second and a half starts a new group - we will match the rhythm to a code.
Your rhythm: -
- Charging Error 1 — Charging error shown by 1 blink while charging: Roomba's battery is not connected.
- Charging Error 2 — Charging error shown by 2 blinks (display Err2) while charging: Roomba has a charging error. The 500 Series manual gives no more specific…
- Charging Error 3 — Charging error shown by 3 blinks (display Err3) while charging: Roomba has a charging error. The 500 Series manual gives no more specific…
- Charging Error 5 — Charging error shown by 5 blinks (display Err5) while charging: Roomba has a charging error. The 500 Series manual gives no more specific…
- Charging Error 6 — Charging error shown by 6 blinks (display Err6) while charging: Roomba's battery is too warm.
- Charging Error 7 — Charging error shown by 7 blinks (display Err7) while charging: Roomba's battery is not cooling.
- Circle dance (spins in circles, backs up, stops) — Roomba repeatedly spins in place instead of cleaning - the 'circle dance'. On the 500 series, a robot that spins in place is almost always…
- Clunking sound while cleaning — A repeated clunking or clacking noise from the brush deck while cleaning. On the 500 series the noise comes from the Cleaning Head Module…
- Error 1 — A side wheel is hanging down or Roomba is stuck — Roomba plays the two-tone “uh-oh” and says “Error one (1)” (a single beep on models…
- Error 10 — A side wheel is stuck or its bumper is not registering obstacles: Roomba says "Error ten (10). Spin Roomba's side wheels to clean."
- Error 2 — The main brushes cannot turn: Roomba says or beeps "Error two (2)."
- Error 5 — A side wheel is stuck: Roomba says or beeps "Error five (5). Spin Roomba's side wheels to clean."
- Error 6 — Cliff sensors are dirty, Roomba is stuck, hanging over a cliff, or on a dark surface: Roomba says or beeps "Error six (6)."
- Error 7 — A side wheel is stuck: Roomba says "Error 7. Spin Roomba's side wheels to clean." Listed in the 500 Series owner's manual troubleshooting…
- Error 9 — The bumper is compressed or the bumper sensor is dirty: Roomba says or beeps "Error nine (9)."