iRobot Robot vacuum Roomba 500 Series Error 10
What this problem usually means
A side wheel is stuck or its bumper is not registering obstacles: Roomba says "Error ten (10). Spin Roomba's side wheels to clean."
Likely causes
- A side wheel is stuck
- Bumper not registering obstacles
- Roomba circling in an extremely large room
How to fix it — step by step
- Clean Roomba's side wheels of hair and debris and confirm they both turn freely
- If Roomba is not circling, use a Virtual Wall to create a smaller cleaning area
- Press CLEAN to restart
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.