iRobot Floor scrubber Scooba 450 Error 2-2
What this problem usually means
Error announced as 'I have experienced error two two (2-2)': Scooba is stuck within a Virtual Wall beam.
Likely causes
- Scooba is stuck within a Virtual Wall beam
How to fix it — step by step
- Check the Virtual Wall placement and move Scooba out of the beam
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related iRobot Floor scrubber Scooba 450 problems
- Error 2-3
- Error 2-4
- Error 3
- Error 4
- Error 5
- Error 6
- Error 7
- I can't detect my tank. Please make sure it is installed correctly, then press CLEAN to restart.
- I want to keep cleaning, but my dirty tank is full. Please empty it, then press CLEAN to restart.
- I'd love to start cleaning, but my battery isn't quite full. Please charge me completely.
- I'm stuck. Please move me, then press CLEAN to restart.
- It looks like something is blocking the sensors on the bottom of my bumper. Please check then press CLEAN to restart.