Hyundai Sedan Elantra Brakes grinding noise

What this problem usually means

Some Elantras, notably 2013 models, develop a grinding noise while braking. The noise was traced to faulty brake pads and rotors, so braking feel and stopping distance can suffer until the worn parts are replaced.

Likely causes

  1. worn or faulty brake pads → Shop the brake pads at Amazon
  2. worn or scored brake rotors → Shop the brake rotors at Amazon

How to fix it — step by step

  1. Stop driving if the pedal feels soft or stopping distance grows, and park safely
  2. Look through the wheel spokes for a thin pad or a deeply scored rotor if visible without removing anything
  3. Note whether the grinding happens on every stop and whether the car pulls to one side
  4. Have a shop measure pad and rotor thickness and replace pads and rotors in axle pairs

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai Sedan Elantra problems

See all Hyundai Elantra codes & guides →