Hayward Pool heater HeatPro HP Error Code
What the HP code means
On Hayward HeatPro heat pump pool heaters, HP indicates excessively high refrigerant pressure or a low water flow condition, or pressure that has not dropped back to normal after shutdown.
Likely causes
- low water flow through the heat pump
- dirty filter or closed valves
- high water temperature
- faulty high pressure control
How to fix it — step by step
- Turn the heat pump off and make sure the circulation pump is running
- Clean or backwash the filter and clear skimmer and pump baskets
- Open valves fully and turn off water features that divert flow
- Wait for pressures to equalize, then restart once
- If HP or repeated HP faults return, call a technician - refrigerant work is sealed-system work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the high pressure switch.
Shop the high pressure switch at RepairClinic or Amazon
Also tied to this fault: water pressure switch - Shop at RepairClinic or Amazon
Parts that commonly fix the HP code
- high pressure switch - Shop at RepairClinic or Amazon
- water pressure switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.