Hayward Pool heater HeatPro VS E06 Error Code
What the E06 code means
On Hayward HeatPro VS heat pump pool heaters, E06 means the unit water temperature rise is too great, with low water flow listed as the possible cause in the fault index.
Likely causes
- low water flow through the heat pump
- dirty filter or partly closed valves
- failed flow/temperature sensing
How to fix it — step by step
- Turn the heat pump off and restore full flow - pump on, filter clean, valves open
- Clear skimmer and pump baskets
- Restart once with strong flow and monitor
- If E06 returns with good flow, call a pool/spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the temperature sensor.
Shop the temperature sensor at RepairClinic or Amazon
Also tied to this fault: flow switch - Shop at RepairClinic or Amazon
Parts that commonly fix the E06 code
- temperature sensor - Shop at RepairClinic or Amazon
- flow switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.