GMC SUV Yukon Tail lights stop working
What this problem usually means
Yukon tail lights are the parts most likely to fail early in any model year, at an average mileage of about 60,000 miles, and the problem is common in 2015 Yukons. Symptoms range from moisture showing up inside the lens to the light not working at all, and headlight, brake light and turn signal moisture problems are also reported. A failed tail light must be replaced before driving legally and safely at night.
Likely causes
- Failed tail light assembly, commonly around 60,000 miles
- Moisture entering the tail light lens
How to fix it — step by step
- Check both tail lights, brake lights and turn signals, and look for moisture inside the lenses
- Check the bulb and fuse first where the design allows bulb replacement
- If the assembly itself has failed or is full of moisture, remove the malfunctioning tail light assembly and install a new one → Shop the tail light assembly at Amazon
- Test all rear lights before driving at night
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the tail light assembly.
Parts that commonly fix it
- tail light assembly - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.