GE Dishwasher C2 Error Code

What the C2 code means

On GE dishwashers with electronic controls, C2 means the total pump-out cycle has exceeded 7 minutes, indicating the drain line is effectively blocked.

Likely causes

  1. Totally blocked drain hose or air gap
  2. Garbage disposer knockout plug left in after a new disposer install
  3. Restricted drain valve in the pump
  4. Failed drain pump

How to fix it — step by step

  1. Press RESET to stop the beeping
  2. Clean the air gap and run the garbage disposer
  3. Check the drain hose end to end for a blockage or kink
  4. If a disposer was recently installed, confirm the dishwasher knockout plug was removed
  5. If water still will not pump out in a full cycle, call for service

Parts that commonly fix the C2 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE dishwasher error codes

See all GE dishwasher codes & guides →