GE Dishwasher C4 Error Code
What the C4 code means
On GE dishwashers with electronic controls, C4 means the machine filled twice after a power failure, which GE attributes to a stuck or failed float switch or a clogged drain or sump.
Likely causes
- Float switch stuck in the raised position
- Failed float switch
- Clogged drain or sump keeping water in the tub
- Debris under the float cover
How to fix it — step by step
- Touch Start, then Cancel/Reset
- Tap on the float cover (the upside-down cup in the front left corner of the tub floor) to un-stick the float
- Check the sump area at the back bottom of the tub for debris and clear it
- Restart a cycle and confirm the tub fills and drains normally
- If C4 repeats, contact service
Parts that commonly fix the C4 code
- float switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.