GE Dishwasher C5 Error Code
What the C5 code means
On GE dishwashers with electronic controls, C5 means the pump-out time is too short, which usually points to a low-water or float problem rather than a drain blockage.
Likely causes
- Water supply turned off or partly closed
- Float switch stuck
- Low household water pressure
- Failing water inlet valve
How to fix it — step by step
- Make sure the water supply valve to the dishwasher is fully turned on
- Tap on the float cover (front left corner of the tub floor) to un-stick the float
- Try running the same cycle again
- Check that the inlet hose is not kinked
- If C5 returns, contact service to check the inlet valve
Parts that commonly fix the C5 code
- water inlet valve - Shop at RepairClinic
- float switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.