Frigidaire Washer E11 Error Code
What the E11 code means
Fill time too long: the front-load washer did not reach the target water level within the allowed time (about 8 minutes).
Likely causes
- Supply faucets not fully open
- Fill hoses kinked or hot and cold hoses reversed
- Clogged inlet valve screens
- Failed water inlet valve
How to fix it — step by step
- Open both supply faucets fully
- Check the fill hoses are not kinked and hot goes to hot, cold to cold
- Turn off the water and clean the inlet valve screens
- Restart the cycle; if E11 returns, the inlet valve likely needs replacing
Parts that commonly fix the E11 code
- water inlet valve - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.