Frigidaire Washer E31 Error Code

What the E31 code means

The water level pressure sensor is not communicating with the electronic control board, so the washer cannot read the water level.

Likely causes

  1. Failed water level pressure sensor
  2. Loose or damaged sensor wiring
  3. Control board fault

How to fix it — step by step

  1. Unplug the washer for 5 minutes and try one cycle
  2. Check the washer is not overfilling or sitting with water in the tub
  3. If the code returns, do not keep restarting it
  4. Book service to test the pressure sensor and its wiring

Parts that commonly fix the E31 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Frigidaire washer error codes

See all Frigidaire washer codes & guides →