Frigidaire Washer E35 Error Code
What the E35 code means
The water level pressure sensor detects an overfill: there is too much water in the tub.
Likely causes
- Water inlet valve stuck open
- Failed or clogged pressure sensor or its air hose
- Control board fault
How to fix it — step by step
- Turn off the water supply faucets right away
- If the washer keeps filling while unplugged, the inlet valve is stuck and needs replacing
- Unplug the washer and let it drain or bail out excess water
- Book service if the valve is not stuck, to test the pressure sensor
Parts that commonly fix the E35 code
- water inlet valve - Shop at RepairClinic
- water level pressure sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.