Ford Truck Ranger Overheating Error Code
What the Overheating code means
CarParts.com notes that on 20-year-old Ranger 3.0L trucks, water pumps, thermostats, and radiators are past their service life. Addressing these cooling parts early matters because continued overheating can lead to head gasket failure.
Likely causes
- worn water pump
- stuck thermostat
- failing radiator → Shop the radiator at Amazon
How to fix it — step by step
- Stop driving if the temperature gauge climbs into the red, and let the engine cool before opening anything
- Check the coolant level in the reservoir when the engine is cold
- Have a shop test the thermostat and inspect the water pump and radiator → Shop the water pump at Amazon → Shop the thermostat at Amazon
- Replace the cooling component that has failed
- Refill, bleed the system, and confirm the temperature stays normal on a road test
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the water pump.
Also tied to this fault: thermostat - Shop at Amazon; radiator - Shop at Amazon
Parts that commonly fix the Overheating code
- water pump - Shop at Amazon
- thermostat - Shop at Amazon
- radiator - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.