Ford Truck Ranger Coolant leaking from intake manifold gasket

What this problem usually means

On Ranger 3.0L V6 models, CarParts.com calls lower intake manifold gasket leaks the single most common failure of that engine, which was built from 1991 to 2008. Coolant can seep internally or externally, so coolant may be lost with no visible puddle, and replacing the intake manifold gasket set is the standard fix.

Likely causes

  1. failed lower intake manifold gasket → Shop the lower intake manifold gasket set at Amazon

How to fix it — step by step

  1. Check the coolant level regularly if it drops with no visible puddle
  2. Look for coolant seepage around the lower intake manifold when the engine is cold
  3. Have a shop pressure-test the cooling system to confirm the leak source
  4. Replace the intake manifold gasket set
  5. Refill and bleed the cooling system and monitor the level after repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Ford Truck Ranger problems

See all Ford Ranger codes & guides →