Ford Truck Ranger Engine misfire at highway speeds
What this problem usually means
RepairPal data summarized by MotorBiscuit names an engine misfire at highway speeds as the most common Ranger problem, reported by over 280 owners. The 1990 and 1992-2009 model years are all at risk, while more recent model years seem to have eliminated the problem.
Likely causes
- engine misfire at freeway speeds with no fault code stored
How to fix it — step by step
- Scan for fault codes, noting the misfire may occur with no code stored
- Note the speed and load when the bucking or misfire happens
- Have a shop diagnose the ignition and fuel systems on the affected cylinders
- Repair the component the diagnosis identifies
- Road-test at highway speed and confirm the misfire is gone
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.