Ecovacs Robot vacuum Deebot Ozmo T8 AIVI Visual Detection Sensor cannot recognize objects
What this problem usually means
The AIVI camera sensor fails to identify objects in front of the robot.
Likely causes
- The cleaning area is not well illuminated
- AIVI Visual Detection Sensor lens is dirty or blocked
- The objects are too close to the AIVI Visual Detection Sensor
How to fix it — step by step
- Make sure the areas to be cleaned are well illuminated, as Smart Recognition requires sufficient lighting
- Clean the lens with a clean soft cloth and make sure the sensor is not blocked; avoid detergent or cleaning spray
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot Ozmo T8 problems
- AUTO Mode Button flashes RED
- AUTO Mode Button glows a solid RED (low battery)
- DEEBOT cannot return to the Docking Station
- DEEBOT does not clean automatically at the scheduled time
- DEEBOT gets stuck while working and stops
- DEEBOT is making too much noise when cleaning
- DEEBOT is not able to connect to the home Wi-Fi network
- DEEBOT is not charging
- DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned
- DEEBOT returns to the Docking Station before it has finished cleaning
- The water is not coming out of the Reservoir when DEEBOT is mopping