Ecovacs Robot vacuum Deebot N10 The water is not coming out of the Reservoir when DEEBOT is mopping

What this problem usually means

The mop stays dry because no water is reaching the mopping pad.

Likely causes

  1. The water inlet filter on the bottom of the Reservoir is clogged
  2. The Reservoir runs out of water
  3. The water outlets on the bottom of DEEBOT are clogged

How to fix it — step by step

  1. Unscrew the water inlet on the bottom of the Reservoir and clean the filter
  2. Add water into the Reservoir
  3. Check the water outlets on the bottom of DEEBOT and clean them

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Ecovacs Robot vacuum Deebot N10 problems

See all Ecovacs Deebot N10 codes & guides →