Ecovacs Robot vacuum Deebot N10 DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned

What this problem usually means

Some spots are skipped while other areas are cleaned more than once.

Likely causes

  1. The cleaning cycle is interfered with by small objects or barriers on the floor
  2. DEEBOT is working on slippery polished floors
  3. DEEBOT is unable to reach certain areas blocked by furniture or barriers
  4. The TrueMapping Distance Sensor is blocked

How to fix it — step by step

  1. Remove power cords and small objects from the floor; DEEBOT will automatically clean the missed area, so do not move it manually or block its path during the cycle
  2. Make sure floor wax is dried before DEEBOT starts cleaning
  3. Tidy up the area by putting furniture and small objects in their proper place
  4. Remove the objects blocking the TrueMapping Distance Sensor

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Ecovacs Robot vacuum Deebot N10 problems

See all Ecovacs Deebot N10 codes & guides →