Dreame Robot vacuum Dreame X40 Ultra The robot will not turn on
What this problem usually means
The robot does not power on when the button is pressed.
Likely causes
- Battery is low
- Battery temperature is too low or too high (operating range 0°C to 40°C / 32°F to 104°F)
How to fix it — step by step
- Recharge the robot on the base station and try again
- Move the robot into the 0°C to 40°C operating range and let it return to a normal temperature before retrying
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame X40 Ultra problems
- The station cannot automatically empty the dust box
- The water level in the washboard is abnormal
- Voice prompt: "Laser sensor abnormal / LDS abnormal"
- Docking failed (robot repeatedly docks or fails to dock for charging)
- Robot fails to collect dust at the base station
- Side brush does not rotate / "Side brush entangled, please clean"
- The charging speed is slow
- The mop pad holder is raised abnormally
- The noise increases while the robot is operating
- The robot cannot find and return to the base station
- The robot fails to connect to Wi-Fi
- The robot gets stuck in front of the base station and cannot return to it