Dreame Robot vacuum Dreame X40 Ultra Side brush does not rotate / "Side brush entangled, please clean"

What this problem usually means

The side brush stays raised or does not spin, or the robot reports that the side brush is entangled. Per Dreame, the side brush is raised by default and only descends when needed; it also lifts during positioning, recharging, carpet cleaning, cross-zone navigation and voice calls.

Likely causes

  1. Side brush is deformed
  2. Side brush is entangled with foreign objects such as power cords or charging cables

How to fix it — step by step

  1. Check whether the side brush is deformed or entangled with foreign objects → Shop the side brush at Amazon
  2. If the side brush is deformed, replace it with a new side brush
  3. If there are foreign objects, pull out the side brush and clean them off
  4. After cleaning, place the robot near the cleaned area to continue cleaning
  5. Tidy up power cords on the ground before cleaning to prevent entanglement

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame X40 Ultra problems

See all Dreame Dreame X40 Ultra codes & guides →