Dreame Robot vacuum Dreame D9 D9 keeps trying to connect after returning to the dock
What this problem usually means
The D9 repeatedly re-docks / tries to connect after it has already returned to the dock.
Likely causes
- Dust on the dock and on the charging pad of the D9
How to fix it — step by step
- Check whether the dock and the charging pad of the D9 are stained with dust, and wipe off the dust before use
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame D9 problems
- Device error (generic error state)
- Network connection fails
- Side brush or main brush is entangled during cleaning
- Cleaning performance fades / debris is missed on the floor
- D9 fails to charge
- D9 fails to power on
- D9 fails to reposition itself
- D9 fails to resume cleaning after recharging itself
- D9 fails to return to the dock
- D9 fails to squirt water, or only a little water comes out during mopping
- D9 is trapped during cleaning