Carrier Furnace 10.1 Error Code

What the 10.1 code means

L1 polarity fault on Carrier furnaces with the 3-digit status display, such as the 58SC0B/58SC1B. The LED flashes rapidly and the display reads 10.1: the polarity of the incoming 115 V power is reversed and the furnace will not operate.

Likely causes

  1. Line-voltage hot and neutral reversed at a junction box, outlet or the furnace
  2. Improper 24 V transformer phasing on twinned furnaces

How to fix it — step by step

  1. Turn the furnace off at the service switch and leave it off
  2. Note the code for the technician
  3. Do not open junction boxes or swap wires yourself - this is live 115 V wiring
  4. Call an HVAC technician or electrician to correct the polarity

Parts that commonly fix the 10.1 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Carrier furnace error codes

See all Carrier furnace codes & guides →