Carrier Furnace 24 Error Code
What the 24 code means
Secondary voltage fuse is open. On Carrier 58-series furnaces, code 24 means the 3-amp fuse protecting the 24 VAC secondary circuit on the control board has blown, which points to a short circuit in the low-voltage wiring, including the thermostat leads.
Likely causes
- Short circuit in 24 VAC wiring
- Shorted thermostat leads
- Shorted accessory (humidifier, condensate pump) wiring
How to fix it — step by step
- Turn the furnace power off at the service switch
- Look at the thermostat cable where it is visible for obvious damage, pinching or bare wire - do not strip or rewire it
- Do not just replace the fuse - it will blow again until the short is found
- Call a technician to isolate the short and replace the fuse
Parts that commonly fix the 24 code
- control board fuse - Shop at RepairClinic
- control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.