Buick SUV Envista Cranks but won't start
What this problem usually means
A 1.2L Envista that cranks smoothly but will not start may have a broken timing belt - or a failed camshaft-driven vacuum pump, which Go-Parts' guide notes can itself cause the belt to fail. Either way the engine has lost cam timing or drive and will not run.
Likely causes
- Broken wet timing belt → Shop the wet timing belt at Amazon
- Failed camshaft-driven vacuum pump damaging the belt
How to fix it — step by step
- Do not keep cranking - if the belt has failed, further cranking can add valve damage
- Have cam/crank correlation and timing checked with a scan tool and inspection
- Have the vacuum pump inspected as part of the diagnosis - replacing only the belt can repeat the failure → Shop the vacuum pump at Amazon
- Replace the belt (and vacuum pump if failed) and check for bent valves before returning the car to service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the wet timing belt.
Shop the wet timing belt at Amazon
Also tied to this fault: vacuum pump - Shop at Amazon
Parts that commonly fix it
- wet timing belt - Shop at Amazon
- vacuum pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.