Buick SUV Envision (First generation, 2016–2020) Loss of brake power assist
What this problem usually means
On the first-generation Envision, the 2.5L (LCV) engine's cam-driven brake vacuum pump can fail, leaving the brake pedal hard and braking effort much higher. The what-breaks Envision buying guide names brake vacuum pump failure as a defining weakness of the base 2.5L engine.
Likely causes
- Failed brake vacuum pump → Shop the brake vacuum pump at Amazon
- Vacuum pump drive wear
How to fix it — step by step
- Notice whether the pedal is hard with the engine running and assist seems gone
- Do not drive it - braking distances grow dramatically without assist
- Have the vacuum pump and its drive inspected; check for oil starvation damage around the pump
- Replace the vacuum pump (and any damaged drive components)
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the brake vacuum pump.
Parts that commonly fix it
- brake vacuum pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.
Related Buick SUV Envision (First generation, 2016–2020) problems
See all Buick Envision (First generation, 2016–2020) codes & guides →