Buick SUV Envision (First generation, 2016–2020) Instrument cluster goes black
What this problem usually means
First-generation Envisions can suffer instrument cluster blackout/display failure, leaving the driver without gauges. The what-breaks Envision guide lists cluster blackout among the model's whole-vehicle electrical faults, alongside a rear climate blend door fault.
Likely causes
- Instrument cluster display failure
- Cluster power/ground or module fault
How to fix it — step by step
- Note whether the whole cluster is dead or only the display portion
- Check fuses and battery condition first - low voltage can blank modules
- Have the cluster and its wiring/connectors tested
- Repair or replace the instrument cluster and program it if required → Shop the instrument cluster at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the instrument cluster.
Parts that commonly fix it
- instrument cluster - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.
Related Buick SUV Envision (First generation, 2016–2020) problems
See all Buick Envision (First generation, 2016–2020) codes & guides →