BMW Sedan 3 Series Power window not working

What this problem usually means

BMW side door window regulators may fail, causing the window to stop working; in some cases the window falls inside the door. The repair requires window regulator replacement. A related failure is the power window motor overheating, making the window move slowly or stop mid-travel and work again after the motor cools.

Likely causes

  1. Window regulator mechanism failure
  2. Power window motor overheating/failure

How to fix it — step by step

  1. Try the affected window from its own switch and note any motor noise or grinding → Shop the window motor at Amazon
  2. If the glass has dropped into the door, stop cycling the switch and secure the glass
  3. Remove the door trim to confirm regulator vs motor failure
  4. Replace the window regulator (or motor) and test full travel → Shop the window regulator at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related BMW Sedan 3 Series problems

See all BMW 3 Series codes & guides →