BMW Sedan 3 Series Heater blower fan not working properly

What this problem usually means

The heater/AC blower final stage fan resistor (final stage unit) is a documented BMW failure: the heater fan speed varies regardless of setting, the fan will not turn off when the car is switched off, or the fan will not switch on at all. The repair is replacement of the blower final stage resistor.

Likely causes

  1. Blower final stage fan resistor (final stage unit) failure

How to fix it — step by step

  1. Check whether the fan runs only erratically, only on some speeds, won't switch off, or won't run at all
  2. Check the blower fuse first
  3. If the fuse is good and the behaviour matches, replace the blower final stage resistor
  4. Retest all fan speeds and confirm the fan stops with the car off

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related BMW Sedan 3 Series problems

See all BMW 3 Series codes & guides →