Audi SUV Q3 (F3, 2019–2025) Rear camera image not displaying

What this problem usually means

An error in the camera control unit at start-up on 2024-2025 Q3s (and some VW Tiguan and Arteon) can stop the rearview camera image from displaying, failing FMVSS 111. This is NHTSA recall 25V082 (29,569 vehicles campaign-wide); dealers update the camera software. The symptom is a blank or frozen rearview camera screen.

Likely causes

  1. Camera control unit start-up error preventing the rearview image from displaying → Shop the rearview camera control unit at Amazon

How to fix it — step by step

  1. Select reverse and confirm whether the camera image appears
  2. Run your VIN through NHTSA's recall lookup and confirm whether the 25V082 remedy shows as complete
  3. Have the dealer update the camera control unit software if the recall is still open
  4. Re-test the camera image after the update

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q3 (F3, 2019–2025) problems

See all Audi Q3 (F3, 2019–2025) codes & guides →