Audi SUV Q3 (F3, 2019–2025) Coolant leak from coolant pump
What this problem usually means
Audi bulletin TSB 2071515 covers coolant loss traced to the coolant pump on 2.0 TFSI engines, listing the 2020-2024 Q3 along with other 2.0 TFSI Audis. Audi tells technicians to pinpoint the leak first and rule out a low level caused by poor bleeding at the factory or after an earlier repair. Symptoms are a coolant warning lamp, a dropping coolant level and a sweet coolant smell after driving. The bulletin is a repair bulletin, not a recall, so it is covered only under warranty.
Likely causes
- Coolant pump leaking (2.0 TFSI)
- Low coolant level from poor bleeding at the factory or after an earlier repair (must be ruled out)
How to fix it — step by step
- Check the coolant level cold and start a level log; a steady fall confirms a leak
- Look and smell for coolant traces and a sweet smell around the pump after driving → Shop the coolant pump at Amazon
- Have the system pressure-tested and the leak pinpointed before replacing parts, as the bulletin directs
- Replace the coolant pump if it is confirmed as the source, and ask for records of any replacement under TSB 2071515
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the coolant pump.
Parts that commonly fix it
- coolant pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.