Audi Sedan A6 (C7, 2012–2018) Carbon Buildup
What this problem usually means
Carbon buildup is documented on the C7 A6 range's direct-injection engines, and the CarScout C7 guide covers it specifically for the S6's 4.0T V8: deposits from direct injection build on the intake valves, and a walnut-blasting cleaning at around 80,000 miles typically costs $400-$800. The same direct-injection mechanism affects the 2.0T and 3.0T cars, producing P0300-series misfire codes, rough running and power loss as deposits accumulate.
Likely causes
- Carbon deposits on intake valves from direct injection
- Intake runner flap restriction from deposits
- PCV oil vapour contributing to deposit formation
- Short-trip driving accelerating buildup
How to fix it — step by step
- Have misfire codes read; P0300-series codes across several cylinders with rough idle support carbon
- Rule out coils, plugs and PCV faults on flagged cylinders first
- Confirm deposits by inspection (borescope or manifold removal) before paying for cleaning
- Have the valves walnut-blasted and the intake cleaned if deposits are confirmed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the intake manifold gasket set.
Parts that commonly fix it
- intake manifold gasket set - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.