Audi Sedan A3 Start-stop system malfunction

What this problem usually means

The 2017-2020 A3 can exhibit start-stop system malfunction, linked to accelerator or brake pedal problems; the issue has also affected the S3, TT, Q5 and other Audis. Reports link it to loss of power steering function and delayed braking response, which can make the car difficult to manoeuvre - if your A3 shows these symptoms it should be checked by a mechanic as soon as possible.

Likely causes

  1. Start-stop system fault linked to accelerator/brake pedal problems
  2. Loss of power steering function and delayed braking response reported with the fault

How to fix it — step by step

  1. Note whether the malfunction comes with heavy steering or delayed braking response
  2. Have the start-stop system and pedal sensors diagnosed promptly rather than continuing to drive on the symptoms
  3. Have the faulty component repaired and the system re-tested

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi Sedan A3 problems

See all Audi A3 codes & guides →