Audi Sedan A3 Engine misfire
What this problem usually means
Engine misfire is commonly reported on the 2006-2010 and 2016 A3, accompanied by poor acceleration and a check engine light. The most reported cause is ignition coil failure, usually at around 69,000 miles. An ignition coil replacement resolves it; on high-mileage cars, replacing all the coils in one go is recommended to prevent further misfiring later.
Likely causes
- Ignition coil failure on the misfiring cylinder → Shop the ignition coil at Amazon
How to fix it — step by step
- Have the codes read and identify exactly which cylinder is misfiring
- Swap the suspect coil to another cylinder and see whether the misfire code moves with it
- Replace the failed coil - and all coils together on a high-mileage car
- Do not keep driving with a flashing check engine light, which signals a damaging misfire
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the ignition coil.
Shop the ignition coil at Amazon
Also tied to this fault: spark plugs - Shop at Amazon
Parts that commonly fix it
- ignition coil - Shop at Amazon
- spark plugs - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.