Audi Sedan A3 Check engine light and hesitation - high pressure fuel pump
What this problem usually means
Some 2006-2008 and 2012 A3s with the 2.0L turbocharged engine have high pressure fuel pumps that wear and fail, causing hesitation when accelerating and an illuminated check engine light; some cars also develop starting issues. Replacing the high pressure fuel pump resolves it, but the camshaft and its follower must also be inspected for damage, with further repairs on a case-by-case basis.
Likely causes
- High pressure fuel pump worn/failed
- Cam follower and camshaft damage accompanying the pump failure → Shop the cam follower at Amazon
How to fix it — step by step
- Have fuel pressure tested against specification under load; hesitation alone does not prove the pump
- Inspect the camshaft and follower for damage before fitting a new pump
- Replace the high pressure fuel pump if pressure tests confirm it → Shop the high-pressure fuel pump at Amazon
- Road-test for hesitation and confirm the check engine light stays off
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the high-pressure fuel pump.
Shop the high-pressure fuel pump at Amazon
Also tied to this fault: cam follower - Shop at Amazon
Parts that commonly fix it
- high-pressure fuel pump - Shop at Amazon
- cam follower - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.