Aiper Pool cleaner Scuba N1 Red light on (solid)

What this problem usually means

The indicator light stays on red: on the Scuba N1 this is the low-battery indicator. Aiper states this is normal — it is not a fault code.

Likely causes

  1. Battery charge is low

How to fix it — step by step

  1. Remove the device from the pool and recharge it fully
  2. Note the battery is only 30-50% charged when the machine leaves the factory, so charge it fully before first use

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Aiper Pool cleaner Scuba N1 problems

See all Aiper Scuba N1 codes & guides →