Winix Air purifier Zero S (AZSU350-JWE) Check Filter

What this problem usually means

Filter Replacement Indicator: the LED lights up when the filters need replacement. The True HEPA Filter lasts approximately 12 months; the Activated Carbon Filter is cleaned once every 3 months and cannot be washed, and the Pre-Filter is permanent and cleaned once every 14 days.

Likely causes

  1. True HEPA Filter has reached the end of its approximately 12-month life
  2. Filter replacement interval reached - frequency may vary based on the environment

How to fix it — step by step

  1. Remove the front panel by gently pulling its top edge forward
  2. Remove the Pre-Filter and remove the filters from behind it, taking them out of their protective plastic bags if new
  3. Install the filters in order: True HEPA Filter (rear), Activated Carbon Filter (middle), Pre-Filter (front) → Shop the activated carbon filter at Amazon → Shop the true hepa filter at Amazon
  4. Close the front panel and plug the power cord into an electrical outlet
  5. After replacing the filters, press and hold the Filter Reset Button for at least 5 seconds with a small object such as a paperclip until the Filter Replacement Indicator turns off

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Winix Air purifier Zero S (AZSU350-JWE) problems

See all Winix Zero S (AZSU350-JWE) codes & guides →